Knowledge Base › CHAX 11 › Printer and check setup

Set up your printer and check format

Choose your printer and stock, line up every field on the check, and set the check format and appearance.

Windows and macOS4 guides
The Printer setup page, with Printer, Tray, Paper and Checks per page on the left, and Check position on page and Current check stock type on the right.

Printer and check stock

Tell CHAX which printer and tray hold your check paper, where the check sits on the sheet, and what kind of stock you load.

All editions

Before you start

In the sidebar, open Settings and choose Printer setup. Every user role can open this page. Your saved choices become the starting point for each check. To change the printer, tray, stock layout or paper for a single check, use the Print settings card on New check.

Use a laser printer. Bank machines read the MICR line along the bottom of the check. Many banks also ask for MICR toner.

Steps

  1. Choose the printer, tray and paper

    Under Printer, select your printer in Installed printer. Tray then lists that printer’s trays, so select the one holding your check stock. A printer that reports no trays shows Automatic. Paper is always Letter, the only size offered.

    The Installed printer, Tray and Paper lists, with Office printer and Letter selected.
  2. Choose checks per page

    1 check per page is the default, and single checks always use it. 3 checks per page applies to batch printing only, which is part of CHAX Enterprise. Other editions show this option greyed out.

    Checks per page, with 1 check per page selected above 3 checks per page and a note about batch printing.
  3. Pick the check position on the page

    Under Check position on page, select Top, Middle or Bottom, matching where the check sits on your paper. Each card has a small picture of the sheet, and the highlighted card is where CHAX prints.

    Three cards labelled Top, Middle and Bottom, each picturing a sheet with the check slot in that position.
    Standard edition. Standard prints one check in the middle of the page, so the cards stay on Middle, and a line under them says so. Professional and Enterprise can print at the top or bottom. With 3 checks per page, all three positions are used, so there’s nothing to choose.
  4. Choose your check stock type

    Under Current check stock type, select the paper you load. Hover over an option in CHAX to read the same explanation as a tooltip.

    Two options: Safety stock (blank security paper), selected, and Economy stock (captions pre-printed).
    Option What it is What CHAX prints
    Safety stock (blank security paper) Blank check paper with security features, such as a watermark or void pantograph, and no printed captions. The whole check: captions, values and the MICR line.
    Economy stock (captions pre-printed) Check forms that already have captions such as Pay to the order of, Date and Memo. The values and the MICR line only.
  5. Print a test page, then save

    Choose Print test page. You’ll get a sample check marked TEST PAGE and VOID, using the settings on screen, even before you save. Print it on plain paper and hold it against your check stock.

    The Print test page button beside Alignment setup.

    When it lines up, choose Save. CHAX shows “Printer setup saved.” If fields are slightly out of place, choose Alignment setup to move them. Read Check alignment and the test page.

    The Save button.

How it works

What prints on a one-check page

The sheet has three parts, each about 3.5 inches tall: the check, a FILE COPY OF CHECK for your records, and a confirmation stub. Their order depends on the position you pick.

Position Top of the check from the top of the sheet Order on the sheet
Top 0 in Check, file copy, stub
Middle 3.37 in File copy, check, stub
Bottom 7.32 in Stub, file copy, check

Three checks per page

This layout, used by batch printing, stacks checks in the top, middle and bottom slots. It has no file copy or stub.

Safety and economy faces

On safety stock, CHAX draws each caption and line itself. On economy stock, the paper supplies the captions, and CHAX places the payee and amount on the same baseline as the pre-printed lines. Version 11.1 adjusted the economy face to line up with today’s economy stock.

Host mode

When several PCs share one database in host mode, each PC keeps its own printers. Set up the printer on every computer that prints checks.

Back to top

Check alignment and the test page

Print the alignment test page, measure how far a field is off, and enter an offset so every check lands on your check stock.

Professional and Enterprise

Before you start

  • Set up your printer, tray, check position and stock type. Read Printer and check stock.
  • Go to Settings › Check alignment, or choose Alignment setup on Printer setup. This page is open to a power user or admin.
  • Have an inch ruler and a few sheets of plain paper ready.
Edition limits. Editing offsets is part of CHAX Professional and Enterprise. Standard can view the page and print a test page, but its offset boxes are greyed out.

Units and directions

Offsets use hundredths of an inch. Boxes display two decimals, so 5.00 means 5 hundredths, or 0.05 inch. Each box accepts -100 to 100, which is one inch either way, and its arrows step by 1.

You enter The field moves
Positive X Right
Negative X Left
Positive Y Down
Negative Y Up

What you can move

Begin with the page and MICR offsets. Most printers only need the whole page nudged.

Page offset and MICR offset sections, each with Horizontal (X) and Vertical (Y) boxes in hundredths of an inch.
Setting What it moves
Page offset (applies to all checks) Everything CHAX prints on the sheet: the check, file copy and stub, including the MICR line.
MICR offset (applies to all checks) The check’s MICR line, added to the page offset.
Individual fields (the check only, not the file copy or stub) One field on the check, added to the page offset.

You can move these individual fields: Payer name and address, Bank name, Check number, Date, Payee (pay to the order of), Amount, Amount in words, Payee address, Signature / authorization and Memo. Scroll the right-hand card to reach the last two.

The Individual fields list, with X and Y boxes for each field from Payer name and address to Payee address.

Align your checks

  1. Print the alignment test page

    Choose Print test page. CHAX sends a void sample check to the printer saved in Printer setup, at your saved check position. It uses the offsets on screen, whether or not you’ve saved them.

  2. Read the test page

    The page contains:

    • A sample check with VOID across it and the memo ALIGNMENT TEST - VOID.
    • Inch rulers on the top edge (1 in to 8 in) and the left edge (1 to 10).
    • A box around the MICR clear band, with a label saying the MICR line must print inside it, 3/16 inch or more above the bottom edge of the check.

    Place the plain-paper test page over a sheet of check stock and hold both up to a light. Compare each printed field with its spot on the stock.

  3. Measure and enter the offset

    Measure the gap in inches and multiply by 100. Then enter the result in the right place:

    • Everything off by the same amount: the page offset.
    • Only the MICR line off: the MICR offset.
    • Only one field off: that field’s row.
    The Page offset section highlighted, with Horizontal (X) and Vertical (Y) boxes, above the MICR offset section.
  4. Print again, then save

    Print another test page. When it lines up, choose Save, and CHAX shows “Alignment saved. It applies to every check you print.”

    To start over from zero, choose Reset offsets. Nothing changes until you save.

Worked example

Say the date prints 0.05 inch below the date line on your stock, so it has to move up by 0.05 inch.

  1. Convert the distance: 0.05 inch × 100 = 5 hundredths.
  2. Apply the direction: up is negative Y, so the offset is -5.
  3. In the Date row, type -5 in Vertical (Y). The box shows -5.00 and the preview moves.
  4. Print a test page, confirm the result, and choose Save.
The Date row highlighted in the Individual fields list, with its Horizontal and Vertical boxes.

If the whole check had printed 0.05 inch too low, you’d enter -5 in the page offset’s Vertical (Y) instead.

Test on your real stock. The page itself reminds you that printed alignment has to be verified on the printer and check stock you actually use. Print one test page on check stock before a run.

How it works

Coordinates. CHAX measures from the top left corner of an 8.5 × 11 inch sheet, in hundredths of an inch. An offset adds straight to a field’s position, so 1 in a box equals exactly 0.01 inch on paper. The preview uses the same layout as the printer.

How offsets combine. The page offset moves every part of the sheet. MICR and field offsets add to it, for the check only. The file copy and stub follow the page offset and ignore the other two.

MICR clear band. Bank machines read the MICR line in the bottom 5/8 inch of the check. Keep the line inside the outlined box on the test page.

Upgrades from CHAX 10. An upgrade starts from CHAX 11’s own alignment and leaves CHAX 10’s offsets behind. If CHAX 10’s alignment was different, the import review tells you and suggests an alignment test page.

Back to top

Check format

Pick a signature line or the authorization message, decide whether check lines and the EPC code print, and hide the CHAX branding line.

All editions

Open Check format

Open Settings and choose Check format. Power users and admins can open this page. On the right, Check preview (read-only) applies your choices to a sample check, using your first payer and default payee.

Set the options

Pick one format, set the three switches, then save.

  1. Classic (default)

    Choose this for an AUTHORIZED SIGNATURE line at the bottom right of the check, where a signature goes.

    The Classic (default) option.
  2. Alternate authorization message

    Choose this for checks drawn on a payer’s account with their permission. A short message prints in place of the signature line:

    • THIS PAYMENT HAS BEEN AUTHORIZED BY YOUR DEPOSITOR
    • Any questions? Call and the payer’s phone number, left out if the payer has none
    • Signed: and the payer’s name
    • by authorized representative

    The grey Original message (read-only) box shows the pay line wording, which is the same in both formats.

    Alternate authorization message selected, above the grey Original message (read-only) box.

    The message prints in the signature area. The Signature / authorization offset on Check alignment sets its position.

    The authorization message on a check: This payment has been authorized by your depositor, Any questions? Call (555) 010-0142, Signed: Alex Morgan, by authorized representative.
    Get authorization first. You need your client’s authorization to draw a check on their account. Read Payment authorization forms.
  3. Show check lines in preview

    This draws the lines under the payee, the amount and the amount in words, and it underlines the memo. Despite its name, the switch also controls whether those lines print. If your stock already has lines, turn it off. The signature line isn’t affected.

    The Show check lines in preview switch, turned on.
  4. Include EPC code

    EPC stands for External Processing Code. It’s a single digit that some banks expect in the MICR line, directly before the routing number. If your bank asks you to, turn it off.

    The Include EPC code switch, turned off.
  5. Hide branding

    Standard and trial checks carry “Printed with CHAX Software” in small grey print at the top right. With Professional or Enterprise, turn on Hide branding to leave it off. In Standard, the switch is greyed out and its caption reads “Upgrade to Professional to hide it.”

    The Hide branding switch and its caption.
    Professional and Enterprise. This applies to Hide branding only.

Choose Save. CHAX shows “Check format saved.” and uses the new format for every later check. Cancel goes back without saving.

The Save and Cancel buttons, with Save highlighted.

How it works

Same layout on screen and on paper

This page, New check and Review check all build their previews from the printed check’s layout, so what you see is what prints.

Where the EPC digit goes

With Include EPC code on, the digit prints in the MICR font, in the MICR line, directly ahead of the routing number’s transit symbol (⑆).

Branding

“Printed with CHAX Software” is 6 pt grey Arial at the top right corner, clear of the check number, and it moves with the page offset. CHAX checks your license at each print. Under a Standard license or in trial mode, the line prints even if Hide branding was turned on earlier.

Upgrading from CHAX 10

Migration from CHAX 10 brings across the signature or authorization choice, check lines and the EPC setting.

Back to top

Appearance and themes

Switch between the light and dark theme, and choose the New check layout, the screen CHAX opens on, and the text size.

All editions

Steps

Open Settings and choose Appearance. Every user can open this page.

  1. Pick a theme

    Under Theme, choose Light, Dark or Match system, which follows your computer’s light or dark setting. The theme changes and is kept immediately, with no need to choose Save. The sun and moon switch at the top right of every page sets it too.

    Three theme cards: Light, selected, Dark and Match system.
  2. Choose the New check layout

    Under New check layout, choose Form left / preview right (default) or Preview left / form right. The new layout appears the next time you open New check.

    Two layout cards: Form left / preview right (default), selected, and Preview left / form right.
  3. Choose the startup screen

    Under Startup screen, choose Home (default) or New check as the first page CHAX shows.

    Startup screen, with Home (default) selected above New check.
  4. Set the text size

    Under Text size, keep Follow system setting (recommended) to use the size set in Windows, at Settings › Accessibility › Text size. Or pick 100%, 110%, 125% or 150%.

    With Remember as per-user preference ticked, each CHAX user has their own layout, startup screen and text size. Untick it to make your choices the default for everyone in the company.

    The Text size list set to Follow system setting (recommended), with Remember as per-user preference ticked below it.
  5. Set announcements, then save

    Show announcements from CHAX Software displays news and offers when CHAX starts, at most once each, for everyone in your company. Turning it off is part of CHAX Enterprise. In other editions, it stays on.

    The Announcements section with the Show announcements from CHAX Software switch turned on.

    Choose Save. CHAX shows “Appearance saved. New check uses the new layout the next time you open it.” Back leaves without saving the layout, startup screen, text size and announcements.

    The Back and Save buttons, with Save highlighted.

What dark mode looks like

Check, print and report previews stay on white paper, so you see the check as it will print.

New check in the dark theme, with dark panels and sidebar, and the check preview still on white paper.
The theme affects the screen only. Printed checks, PDFs and reports are the same in both themes.

How it works

The theme belongs to the Windows user

CHAX keeps the theme per Windows user on this PC, in a small file named theme.json in the CHAX subfolder of that user’s local app data folder. Two people sharing a computer with separate Windows accounts can each have their own theme. A Windows user who has never picked one gets the theme saved for the company in Appearance.

Other settings belong to the CHAX user

The company database stores the New check layout, startup screen and text size. With Remember as per-user preference ticked, they’re saved for the signed-in CHAX user. Without it, they become the company default and replace your personal choice.

Every screen follows at once

All colours come from one light and one dark palette, so the whole app changes together. Previews of checks, print review and reports draw on white paper in both.

Back to top

Need a hand?

Talk to the support team, or browse all CHAX 11 help.

Contact Support All CHAX 11 Help