Knowledge Base › MultiCHAX 11 › Data and multi-PC

Your data and multiple PCs

Back up and restore your database, share it between PCs, move to a new computer, or uninstall MultiCHAX 11.

Windows5 guides
Settings, Database and backup, with the current database, the Backup card and backup list, the Restore card, and PCs using MultiCHAX.

Your database and backups

See which database MultiCHAX uses, confirm it’s connected and current, and back it up while everyone keeps working.

All editionsAdministrators

What the database holds

One Firebird database stores your bank accounts, check templates, payees and payers, users, company-wide settings and every printed check. It’s usually C:\MultiChax\MULTICHAX.FDB. All the office’s PCs share it, and the previous version of MultiCHAX can stay on it too. See Using MultiCHAX on more than one PC.

To work with it, go to Settings › Database & backup. Only administrators can open Settings.

Check the current database

The Current database card with the server, the database file, the status, and the Change database button.

The same server and file appear at the bottom of the sidebar on every screen.

Status Meaning
Connected · version 5 Everything is fine.
Connected · version 4, needs an upgrade to 5 The database is missing MultiCHAX’s newer tables. Choose Back up and upgrade. MultiCHAX makes a backup, then upgrades, and the previous version of MultiCHAX still works with the database afterward.
Connected · version 6, newer than this MultiCHAX (5) Another PC runs a newer MultiCHAX. The database stays untouched. Update MultiCHAX on this PC.
A message in red MultiCHAX can’t reach the database. See Fix database connection problems.

To switch databases, choose Change database…. Enter the Server and Database file on the server, choose Test connection, then Use this database. MultiCHAX restarts and opens it.

Make a backup

  1. Check the backup folder

    Backup folder on this PC begins as Documents\MultiCHAX Backups. To use somewhere else, such as a USB drive or network folder, choose Choose folder….

    The Backup folder on this PC box and the Choose folder button.
  2. Choose Back up now

    MultiCHAX copies the whole database while people keep working, and it shows the MB written so far. At the end you see Backed up to MULTICHAX-20261027-153012-manual.fbk in …, and the new backup tops the list.

    The Backup card with the Back up now button.
  3. Keep a copy somewhere else

    If the PC holding the database fails, a backup on that same PC is no help. From time to time, copy the backup folder to a USB drive or another computer.

    The Keep backups safe card.
Any PC can back up. You don’t have to be on the server PC. MultiCHAX never deletes or overwrites a backup, so old ones stay until you remove them yourself.
Keep backups safe. Backups contain bank account and routing numbers. Store them where only the people who run MultiCHAX can open them.

The backup list

Column Shows
MADE The time of the backup.
WHY Back up now, Before a restore, Before an upgrade, Daily or Weekly.
BY The user and PC that made it.
VERSION The version of the database it came from.
SIZE How large the backup file is.

To put a backup back, see Restoring a backup.

How it works

The backup files

A backup is a Firebird backup file named MULTICHAX-yyyyMMdd-HHmmss-reason.fbk, with a .manifest.json beside it. The manifest records when, where and by whom it was made, the MultiCHAX and database versions, the file size, and a SHA-256 fingerprint that a restore checks before using the file.

While writing, the file is named .fbk.part. MultiCHAX renames it only once it’s complete, so a partial backup can’t pass as a good one.

Backing up over the network

The Firebird server streams the backup, so your PC can save it to its own folder even with the database on another PC.

Shared with the previous version

The previous version of MultiCHAX on Firebird 5 uses the same backup format, so each version can restore the other’s backups.

Upgrades when MultiCHAX starts

When MultiCHAX starts and finds an older database, it upgrades it immediately (“Upgrading the database…”). Only Back up and upgrade on this page backs up first, so make a backup before you install a new version.

Back to top

Restoring a backup

Return the database to the state it was in when a backup was made. MultiCHAX checks the backup, backs up the current database first, and keeps the old file.

All editionsAdministrators

Before you start

  • Use the server PC. A restore replaces the database file, so it runs only on the PC that holds the database. Other PCs show Restoring replaces the database file, so it runs on the PC the database is on: open MultiCHAX on OFFICE-PC to restore. on the Restore card.
  • Have everyone else close MultiCHAX on all PCs, including the previous version. The restore won’t run while anyone else is connected.
  • Make sure Firebird’s tools are on the server PC. MultiCHAX uses Firebird’s gfix to check the restored database. It comes with the Firebird server.
You lose recent work from the database. Checks printed after the backup was made disappear from it, and so do any later bank account, template or user changes. They remain in the old database file that MultiCHAX keeps.

Restore step by step

  1. Choose the backup

    On the server PC, go to Settings › Database & backup. Select a backup in the list, or use Choose backup file… to pick a .manifest.json or .fbk file from another place, such as a USB drive.

    The backup list and, below it, the Restore card with the Choose backup file button.
  2. Check the backup

    Choose Check the backup. MultiCHAX confirms that the file is whole and undamaged, that nobody else is on the database, and that the backup didn’t come from a newer MultiCHAX. A message then tells you it’s ready to restore, with the backup’s date, the user and PC that made it, and a request to type RESTORE.

  3. Type RESTORE

    Enter RESTORE in the box, in capitals. This keeps a restore from starting by accident.

  4. Restore

    Choose the red Restore backup button and wait while MultiCHAX shows each step.

  5. Restart MultiCHAX

    When Restart MultiCHAX to use the restored database. appears, choose Restart MultiCHAX. People on the other PCs can then reopen MultiCHAX.

If the backup can’t be restored

Message What to do
Restoring replaces the database file, so it runs on the PC the database is on Open MultiCHAX on the server PC the message names.
Another copy of MultiCHAX is open on this PC. Close it, then check again. Close the other window, the previous version included, and choose Check the backup again.
2 other connections … from: FRONT-DESK, BACK-OFFICE. Close MultiCHAX on those PCs, then check again. Close MultiCHAX on each PC listed.
… It is damaged or incomplete. The size or fingerprint doesn’t match the manifest. Use a different backup.
The backup is from a newer MultiCHAX (database version 6); this MultiCHAX supports up to 5. Update MultiCHAX on this PC first.
Type RESTORE, in capitals, to confirm. Enter the word in capital letters.

How it works

The five steps

  1. MultiCHAX makes a safety backup of the current database, in a Backups folder next to the database file.
  2. It restores your backup to a new file beside the live one, MULTICHAX.restored-stamp.FDB.
  3. It tests the new file with a full gfix validation, reads every table, and compares the database version.
  4. It shuts down the live database.
  5. It swaps the files and keeps the old database as MULTICHAX.before-restore-stamp.FDB.

When a step fails, MultiCHAX puts the previous database back, so you always have one.

Backups from the previous version

The previous version of MultiCHAX on Firebird 5 writes the same backup format. You can restore its backups here, and the previous version of MultiCHAX can restore backups made here.

Back to top

Using MultiCHAX on more than one PC

Set up one server PC, point the other PCs at its database, and everyone shares the same bank accounts, templates and checks.

All editions

How sharing works

The database sits on one PC, called the server PC, which runs the Firebird database server. The other PCs run MultiCHAX and connect to it over the office network. An ordinary office PC that people use can be the server PC, provided it’s on whenever someone prints checks.

The previous version of MultiCHAX and MultiCHAX 11 can share one database at the same time, so you can move the office over PC by PC. See Upgrading from a previous version of MultiCHAX.

Connect the PCs

  1. Set up the server PC

    The server PC uses a database on itself: Server is localhost and the file is usually C:\MultiChax\MULTICHAX.FDB. See First-run setup. Then confirm Windows Firewall lets the other PCs reach Firebird on TCP port 3050.

    The Current database card with Server localhost and the database file.
  2. Install MultiCHAX on each other PC

    When MultiCHAX starts on a new PC and finds no database, Welcome to MultiCHAX 11 opens. Under Server, enter the server PC’s name, such as OFFICE-PC. If Firebird on the server uses a different port, put it after a slash: OFFICE-PC/3051.

  3. Enter the file as the server sees it

    Under Database file on the server, enter the path as it exists on the server PC, such as C:\MultiChax\MULTICHAX.FDB. A mapped drive letter or network share won’t work.

  4. Test and use it

    Choose Test connection. Once it reports Connected. Firebird 5.0…, choose Use this database. MultiCHAX saves the connection and restarts.

If the server rejects the user. When the test says the server didn’t accept the MULTICHAX user, open Set up the MULTICHAX user on this Firebird server, enter the server’s SYSDBA password, and choose Set up the MULTICHAX user. See Fix database connection problems.

How many PCs your edition allows

Edition PCs that can use the database
Trial One PC
Standard 2 PCs
Professional No limit
Enterprise No limit

Every PC that prints checks must activate its own license. See Activating your license. For edition prices, see pricing.

The PCs using MultiCHAX card, reading: The trial runs on one PC.

Settings › Database & backup lists the PCs registered with the database and marks yours with (this PC).

When you replace a PC, choose Remove next to the old one so the new one can run MultiCHAX. If you don’t, a Standard license may stop the new PC with A Standard license runs MultiCHAX on 2 PCs, and 2 are already registered. Upgrade to Professional to use MultiCHAX on more PCs.

Which settings each PC keeps

Shared by every PC (in the database) Kept on each PC
Bank accounts, check templates, payees and payers MICR printer and trays (Printer and stock)
Users and permissions Page and MICR offsets (Check alignment)
Transactions: every printed check Print folder and automatic printing (Accounting software)
PDF security password and permissions PDF folder and backup folder
Sign-in on or off, and the secure amount font Light or dark, the startup screen, the license, and the bank routing directory
Per Windows user. Settings kept on a PC are stored for each Windows user who signs in to it. The previous version of MultiCHAX on that PC reads the same printer, offsets and print folder.

How it works

Where the connection is saved

The server and file are stored in MultiChax.xml next to MultiCHAX’s program file. MultiCHAX signs in to Firebird with the same MULTICHAX user on every PC. The SYSDBA password only sets up that user and is never saved.

Counting PCs

At startup, each PC adds its name to a list in the database, the same list the previous version uses, and MultiCHAX checks your edition’s PC limit against it.

Printing

Each PC uses its own MICR printer and its own print folder. A check printed on one PC shows up in Transactions on all PCs immediately.

Back to top

Move to a new computer

Bring your license and printer setup to a new PC, along with the database if the old PC was the server, and keep every check record.

All editionsAdministrators

Choose your move

Look at the bottom of the sidebar on the old PC. Firebird · localhost tells you the database is on that PC.

The old PC What moves Where to start
Uses a database on another PC The license and the PC’s printer setup. The database stays put. Move a PC that prints checks
Is the server PC, which holds the database The database, the license, and the printer setup. Move the database to a new server PC, then the license and printer steps

Move a PC that prints checks

  1. Write down the printer settings

    Each PC keeps its own printer settings, and the database doesn’t hold them. On the old PC, note the MICR printer and trays in Printer and stock, the offsets in Check alignment, and the print folder in Accounting software.

    The Printer and Stock cards with the MICR printer and the two tray settings.
  2. Deactivate the license on the old PC

    Go to Settings › License. Choose Deactivate on this computer…, and then Deactivate. MultiCHAX shows a Deactivation code. Keep it, because support may ask for it. The old PC returns to trial mode.

    Limits on moving. You can move a license twice in any 30 days. If the old PC is broken and you can’t deactivate, contact support to move the license.
  3. Set up the new PC

    Install MultiCHAX and the MultiCHAX virtual printer. When MultiCHAX asks for the database, enter the server PC’s name and the database file as the server sees it. Using MultiCHAX on more than one PC has the details.

    The Virtual printer card marked Installed.

    Settings › Accounting software shows whether the virtual printer is installed.

  4. Activate the license on the new PC

    In Settings › License, enter the same license code or serial number, and choose Activate. See Activate your license.

    The License code or serial number box and the Activate button.
  5. Restore the printer setup and test it

    Enter the printer, trays, offsets, and print folder you wrote down. Print a test page from Check alignment, and hold it against your check stock.

    The Test check panel on the Check alignment page, with the check outlined and marked VOID.
  6. Remove the old PC from the list

    In Settings › Database & backup, find PCs using MultiCHAX and choose Remove next to the old PC. A Standard license runs on 2 PCs, so this frees a place.

    The PCs using MultiCHAX card on the Database and backup page.

    Shown in trial mode, without the list of PCs.

Move the database to a new server PC

Stop printing on the old server after the backup. The restored database won’t contain anything printed after the backup. Keep the old PC’s database file until you’re sure the new one is complete.
  1. Back up the database on the old server

    Ask everyone to close MultiCHAX. In Settings › Database & backup, choose Back up now. Copy the new .fbk file and its .manifest.json file to a USB drive or network folder. Your database and backups explains these files.

    The Back up now button on the Backup card.
  2. Create a database on the new server

    Install Firebird and MultiCHAX on the new PC. On the welcome screen, leave localhost and C:\MultiChax\MULTICHAX.FDB as they are. Choose Test connection, then Create a new database here, then Use this database.

  3. Restore your backup over it

    Sign in as the new database’s administrator. Contact support for the starting sign-in details. Go to Settings › Database & backup, choose Choose backup file…, and pick the backup you copied. Check it, type RESTORE, and restore it. Your own users and passwords return with the backup. Restore a backup covers this in full.

    The Restore card with the Choose backup file button.
  4. Point the other PCs at the new server

    On each of the other PCs, go to Settings › Database & backup and choose Change database…. Enter the new server PC’s name, test the connection, and choose Use this database. PCs on the previous version need the same change made there.

    The Change database button on the Current database card.

How it works

Where everything is saved

  • In the database, so it moves with the database: bank accounts, templates, payees, payers, users, and every printed check.
  • For each Windows user on each PC: the printer, trays, offsets, print folder, and PDF folder, in %AppData%\CHAX\MultiChaxUserSetting.db. The previous version of MultiCHAX shares this file.
  • The license: %LocalAppData%\CHAX\multichax11-license.json.

Why you deactivate first

CHAX’s license server counts each activation. Deactivating gives up this PC’s activation, so the new PC can use the license. Uninstalling MultiCHAX without deactivating leaves the activation counted.

Back to top

Uninstall MultiCHAX 11

Take MultiCHAX 11 off a PC and decide whether your checks database and settings go with it, while the previous version of MultiCHAX and anything other PCs use stay in place.

All editions

Before you start

  • Going to use the license on another PC? Deactivate it first in Settings › License › Deactivate on this computer…. Uninstalling doesn’t give the license up. See Move MultiCHAX to a new computer.
  • Does this PC hold the database? Make a backup in Settings › Database & backup.
  • Check your Windows account. It must be a Windows administrator on this PC.
You can’t undo deleting data. Without a backup, this PC’s bank accounts, templates, and record of every printed check are lost for good.

Uninstall step by step

  1. Start the uninstaller

    In Windows, go to Settings › Apps and uninstall MultiCHAX 11. You can also run Uninstaller.exe, which sits next to MultiChax.exe in the MultiCHAX 11 program folder. Windows asks you to allow changes. If MultiCHAX is open, choose Close it and continue.

  2. Review what goes

    The Uninstall MultiCHAX 11 window lists these under REMOVED FROM THIS PC: the MultiCHAX 11 program and its shortcuts, the MultiCHAX virtual printer, and the logs and leftover settings of every Windows user on the PC.

    The previous version of MultiCHAX on the same PC. The window tells you, and the previous version of MultiCHAX keeps what the two versions share: the database, Firebird, the virtual printer, and the printer settings.
  3. Decide about your data

    Under YOUR DATA, nothing is deleted unless you tick Also delete my checks database and settings. When other PCs or the previous version of MultiCHAX use the database, the box reads Also delete this PC’s MultiCHAX settings, and the database stays no matter what.

    Under DATABASE SERVER, tick Also remove Firebird only if nothing else on this PC needs it. If the database is in use, you see Firebird stays: the checks database is still in use.

  4. Back up if you’re deleting data

    When you’ve chosen to delete data, choose Next. The This permanently deletes your data page lists each item and its size. Choose Create backup… to save MultiCHAX data backup date.zip in Documents, and keep a copy off this PC. Delete permanently stays off until you’ve saved a backup or ticked Delete without a backup. I understand my data can’t be recovered.

  5. Finish

    Choose Uninstall, or Delete permanently, and allow a minute or two. The last page tells you what was removed, where your backup is, and whether you need to restart the PC.

What always stays

Stays on the PC Reason
PDFs in Documents\MultiCHAX, and Documents\MultiCHAX Backups These are your own files, and the uninstaller never deletes them.
A database that other PCs use The database stays if it’s shared on the network, Firebird is open to other PCs, another PC is connected, or a previous version of MultiCHAX is installed. You can’t override this.
Previous versions and other CHAX products The uninstaller removes MultiCHAX 11 and nothing else.

How it works

What deleting your data removes

The database file and the C:\MultiChax folder, MultiChax.xml, the license file, and MultiCHAX 11’s own folders under %LocalAppData%. The printer settings file goes only after the previous version of MultiCHAX is gone as well.

Uninstall from the command line

IT staff can run Uninstaller.exe /quiet, which uninstalls and keeps data. These options add to it:

  • /deletedata backs up to the Desktop, then deletes data.
  • /removefirebird removes Firebird.
  • /dryrun logs what would go and removes nothing.

The log is at %TEMP%\MultiCHAX-Uninstall-date.log.

What remains on the servers

The MULTICHAX login stays on the Firebird server. The license activation stays counted until you deactivate it.

Back to top

Need a hand?

Talk to the support team, or browse all MultiCHAX 11 help.

Contact Support All MultiCHAX 11 Help